How to deal with the water in the air storage tank of AIRERA air compressor

It is normal for the screw air compressor to enter the water. Knowing the function and working principle of the water tank and the operation of the machine can provide a buffer space for our screw air compressor, reduce the pulse and stabilize the voltage. , the machine also does not have to restart because of its buffering, reducing power consumption. The following is to answer the water treatment method of the screw air compressor water tank.

A part of the compressed air of the screw air compressor is stored in the air storage tank, and the air contains a large amount of water molecules. When these fast-moving water molecules touch the tank walls, they condense into water. Over time, a lot of water will accumulate at the bottom. Through the working principle, we can know that the water tank is a normal phenomenon. The next step is how to deal with the water. We need to discharge the formed water in time, because it not only affects the air quality, but also rusts the container. Here are three ways to treat this water:

1. A gas-water separator can be installed in the gas storage tank to separate the air in the compressed air.
2. Install an automatic drainage device at the sewage outlet. The selection of an automatic drainage device is also necessary. Poor drainage is easy to block.
3. The pipeline design is reasonable. The compressed air pipeline generally needs to be inclined at about 1 degree. From the system pipeline to the best pipeline, enter the pipeline to the top of the channel, and make a 180-degree elbow down to the gas tank to be imported.